<track id="026by"></track>

      <td id="026by"><option id="026by"></option></td>
      <table id="026by"></table>
      <acronym id="026by"></acronym>
      <td id="026by"><ruby id="026by"></ruby></td>
    1. 回轉支承結構設計合理


      Troubleshooting of Common Faults of Rotary Bearing

       With the rapid development of machinery industry, slewing support has been widely used in shipbuilding equipment, construction machinery, light industry machinery, metallurgical machinery, medical machinery, industrial machinery and other industries. Slewing support is an indispensable component. Once there is a fault, it must be handled in time, otherwise it will affect the normal operation of machinery. Today, Xiaobian teaches you how to remove common faults of slewing bearings.
        1. The operation is not flexible. If it is a new purchase, please check the production date of slewing bearing. If the time is long (such as more than half a year) and the climate is cold, it is possible that the grease stickiness in the raceway is bigger and the operation is not working well (cold area, winter is more prominent). If it can work without any other abnormalities, it can be used normally. If there is abnormal noise, check whether there is any serious trauma in the transportation process, and feedback the information to the company's after-sales service department for processing, or fill with lubricant.
        2. If the slewing bearing often carries heavy loads, it may be difficult to turn, or even impossible to turn. The reason for this phenomenon is that the bigger the crane tonnage is, the bigger the slewing bearing diameter is, the lower the manufacturing accuracy is, and the safety factor is actually lower, so it is more vulnerable to damage. 。 As far as possible, the safety factor of the slewing bearing can be increased appropriately in the design, and the thickness of the plate at the connecting part of the turntable and the slewing bearing can be increased appropriately, so as to improve the structural stiffness of the slewing bearing and its bearing capacity.
        3. When a new product is idling, the slight abnormal sound will disappear naturally after several dozen turns. If it does not disappear, it may be caused by slight deformation of slewing bearing in the course of transportation, but if the operation is flexible and normal, it can be safely installed and used, and it will disappear naturally after a period of time. If the noise is louder or has not disappeared after a period of time (usually 2-4 months), we should contact our after-sales service department in time.
        These are the common problems in the operation of slewing bearing. Do you understand them? Hope you remember the solution, easy to control the slewing bearing. If you have other unclear welcome to contact us!


      網站地圖 |